2. The workpiece mounting and dismantling, should be gently and lubricated with oil surface, the adjusting screw can not force it running. When shaking hands round each axis to prevent excessive force, too fast and avoid overrun.
We must clean up the oil on the machine and other debris before 3. Processing. Must not place items near the machine. Machining, to ensure timely filling material in order to achieve the required material molding machine full extent.
4. For your own safety, process, non-contact touch processing, when the machine work machine load should not exceed a predetermined, non-super-standard, overload devices.
5. The filler disk should be cleaned daily wipe motors, the electrical box outside dust protection manual control box and keyboard clean. Periodic inspection and lubrication rail, and scroll bars.
Must check the stability of the supply voltage 6. operation. Machine twice turned interval of not less than 30 seconds.
Prohibit the use at the time of equipment failure, downtime immediately found the problem, the process before use.
7. When the machine is working, it is prohibited hands away from the machine and workpiece. When adjusting maintenance equipment, prior to shut down, turn off the power.
8. prohibit non-operators to enter the work area should be kept more than 2 meters away from the device.
9. Do not adjust or repair equipment at work, be sure to shut off the power, and hang warning signs before the operation.
10. When people with the operation, before performing any operation must notify other staff, understand the intention behind the executable confirm.
